2014 Good-Sell Hot Sale Palm Kernel Oil Solvent Extraction Equipment
- Usage: Palm Oil
- Type: Cold & Hot Pressing Machine
- Automatic Grade: Automatic
- Production Capacity: 10TPH to 100TPH
- Model Number: HT-PO001
2014 Good-Sell Hot Sale Palm Kernel Oil Solvent Extraction Equipment Description
Specifications
1.small palm oil refinery machine
2.sunflower oil refinery machine
3.High oil rate, Low waste
4.40 experience
5.ISO&CE
small palm oil refinery machine/sunflower oil refinery machine/corn oil refinery machine
small Palm oil refinery machine aims to refine crude palm oil to enhance the economic value.the machine is customized according to customers’ requirement.we can produce 1-600tons/day including fractionation
crude oil refinery machine:
1.Capacity for oil refining: 1-600 Tons/day
2.Raw materials: all kinds of crude oil, like soybean, peanut, corn, sesame, rice bran,sunflower seed, copra, grape seed, rapeseed, castor seed, cotton seed, etc
3.Products of our coconut oil refining machine: high quality refined vegetable oil for sale
4. process :deguming——-deacidification——-filtration——deodorization—-dewaxing/fractionation—-product oil
the deacidification is very important for vegetable oil refining.
it usally is chemical way or physical way.
Comparison :
chemical way deacidification:
Add in a certain concentration of NAOH which will neutralize the FFA. The FFA will subside in the way of soapstock. some impurities will also centrifugal separated with the soapstock. The advantage of chemical way is deacidification thoroughly and the quality of the oil is stable. The disadvantage is oil loss. The FFA content is higher; the oil loss is bigger.
Physical deacidification:
it is in the vacuum condition, let the steam bring out FFA,unsaponifiables, odorants. In this process, No soapstaock produced, and the quality of FFA is high, some heat sensitive pigment like carotene and odorants will be removed too. The operation is easy and the quantity is large. Also the oil loss is small and no environmentalpollution. Compared to the chemical way, it has its disadvantages too, for physical way refining, the pretreatment of the crude oil is strict, it is not suitable for cotton seed oil which is heat sensitive. And in the high temperature, the oil will produce polymer. The physical way refining is only suitable for good quality crude oil deacidification and it requires strict pretreatment sometimes even decoloration of the crude oil.
Process of deacidification:
1. Neutralization:
In neutralization which means deacidification process, the oil at a proper temperature is added in proper concertration of lye, goes into centrifugal mixer. For best mixing, the mixture is sent into neutralization tank and stay for enough time. During this period, the lye will neutralize the FFA, form soapstock and are separated in neutralization separator. The formed soap stock also can absorb other impurities and pigments. To separate the oil and soapstock more easily, the mixture would be heated, to reduce the viscosity.
2.Washing:
The neutralized oil from the neutralization separator, still contain about 500ppm soap. to reduce the soap content, the oil would be added into about 15% hot water and to wash in the washing mixer. The hot water will absorb the soap and other impurities, then are separated in the washing separator
3.Vacuum-drying and dewatering
The oil from the washing separator still contains some water which is harm to oil stability. To remove this part water, the oil at a temperature of 110-120”C, are sent into Vacuum drying tower to dry the water. After this the oil will be pumped into decoloration process.
Process of decoloration
decoloration aims to remove the pigment and The residual soap etc. it includes:
1.decoloration
The oil firstly should be heated to 105”C.The heated oil then is sent to Vacuum bleaching tower. when the oil goes into the bleaching tower, it mixed with white clay via ratio mixer.
White clay transportation system is used to send the white clay on the ground to the storage tank on the top of bleaching tower.
The bleaching tower are divided into several floors, every floor is equipped with steam ejector which used to mix the oil and white clay. The rest soap, gum, pigment and other metal would be absorbed by the white clay too.
2.filtration
the mixed oil from bleaching tower would be pumped into the filter, and then goes into the secondary filter, here white clay and the solid impurities would be stopped, the bleached oil would be transferred to bleached oil storage for middle storage.
In this filtration system, there are 2 decolorizing filters, always one in filtering and another is emptying and cleaning. When the filter are in emptying and cleaning condition, the filter would be squeezed by steam, so most oil in the filter would be swept into bleaching oil tank, few oil mixed with waste white clay is sent into dirty oil tank. The filter cake have been dried by steam, the leftover oil and water gathered during the drying period are sent into the dirty oil tank too. Finally the dried cake on the bottom of the filter was poured into waste clay room via bleed valve by air vibrator.
The leftover oil in the dirty oil tank would be pumped into bleaching tower for reworking.
Deodorization section
The deodorizing aims to remove the FFA,small molecular substances,including 1.Gassing
The bleached oil are stored in bleached oil tank, this tank are designed to work in vacuum condition. From this tank, the bleached oil is pumped into deaerator, to release the gas into the oil. 2.Heating
The flow of the bleached oil is controlled by a controller, the oil is heated at a temperature of 250-260”c by a series of heat exchanger.
When the oil is heating in the final oil heater, here some low- boilling point FFA and volatiles would evaporate. The steam and liquid oil would go into the packing deodorizing tower from different entrances.
3Deodorization
The heated oil would be distilled in the flashing tower, storage tank and main deodorizing tower, the FFA and smell matters would be removed aftergasification
This is pictures of customers visiting our factories.
Below is the manufacturing process of our factory.
below is pics of delivery below is pics of installation in Congo of a 30tons/day palm oil refinery plant.
if you are interested in our palm oil refinery plant. this project is hot now. because the palm oil market is big and the RPO price is much more higher than CPO. If you are in need, any question please feel free to contact me.
Technical parameters of 2014 Good-Sell Hot Sale Palm Kernel Oil Solvent Extraction Equipment
| Voltage | Up to customer's requirements |
| Power(W) | Up to customer's requirements |
| Dimension(L*W*H) | Up to Specification |
| Weight | Up to Specification |
| Certification | ISO certificate |
| After-sales Service Provided | Engineers available to service Machine overseas |
| Color | Red,Green or any others |
| Raw material | Palm Fruit |
| Name | Complete Production Line |
| Material | Palm Kernel |
| Application | Oil Production Line |
| Function | Making Palm Oil |
| Product name | Palm Kernel Oil Making Machine |
| Advantage | The most advanced technology |
| Warranty | 12 Months |
| Quality | Top Level |
