Qie New Generation Well-Loved Automatic Palm Oil Fractionation Machine
- Type: Cold & Hot Pressing Machine
- Production Capacity: 100~1000T/D, 100%
- Model Number: HT-POM
- Voltage: 380v
- Power(W): 99kw
Qie New Generation Well-Loved Automatic Palm Oil Fractionation Machine Description
palm oil equipment
Technical and Performance Indexes in Palm Oil Pressing Workshop
(1)Crude palm oil standard:
|
FFA : |
Less than 5 % |
|
Moisture : |
Less than 0.1 % |
|
Dirt: |
Less than 0.02 % |
(2)Kernel Standard :
|
Broken Kernel: |
Less than 15 % |
|
Moisture: |
Less than 7 % |
|
Dirt: |
Less than 6 % |
Palm Fruit Pressing Process Description
The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase. Usually we adopt the method of press to produce it, and this technology is very mature. Before press , Fresh fruit bunch will be taken sterilizer and thresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by loading ramp, then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm fruit and bunch , for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has passed sterilizer and thresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand trap tank and treated by the vibrating screen ,afterward the CPO will be sent to clarification station treatment section . For the wet fibre cake which be produced by screw press, after separating nut, it will be sent to boiler house to burnt.
The wet fiber cake contain wet fiber and wet nut, the fiber contain about 6-7% oil and fat and a few of water .Before we produce the nut, we should separate the nut and fiber . Firstly, the wet fiber and wet nut enter the cake breaker conveyor to be cracked, and mostly of the fiber should be separated by pneumatic fiber depericarper System. The nut, little fiber and big impurity will be further separated by the polishing drum. The separated nut should be sent to nut hopper through the pneumatic nut transport system, and then adopt the ripple mill to crack the nut, after cracking , most of the shell and kernel will be separated by cracked mixture separating system, and the rest of mixture of kernel & shell enter to the special clay bath separating system to separate them, after this processing , we could get pure kernel(The shell content in kernel <6%),which should be conveyed to the kernel silo to dry. After dried moisture as 7%, the kernel will be conveyed to kernel storage bin for storage; Usually the dry kernel’s capacity ratio is 4% . So it should be collected until enough quantity, and then be sent to the palm kernel oil mill; For the separated shell, it should be conveyed to shell temporary bin as the spare boiler fuel.
After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous clarification tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge tank , whereafter the sludge oil should be pumped to the centrifuge to separate, the separated oil enter the continuous clarification tank again; The pure oil in the pure oil tank should be sent to the oil purifier , and then enter the vacuum dryer , at last the dried oil should be pumped collection tank.
|
Quality and Service Commitment |
|
|
Our company always put the interests of customers and product quality to the first place, and always adhere to the”no best,only better” as our purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments are as follows: |
|
|
1. |
Ensure to timely provide complete sets of equipment and accessories. |
|
2. |
Ensure that one-time installation debugging acceptance. |
|
3. |
To provide high quality material with preferential price. |
|
4. |
Priority to provide customer our new craftworks and products. |
|
5. |
Free training technological operator to ensure the trained staff can operation independently. |
|
6. |
In the installation process,we will appoint a installation supervision staff on the spot. |
|
7. |
we will offer an experienced project manager, organize a good installation team for the work of field installation debugging. |
|
8. |
After the equipment field assembly and installation, we will be also responsible for the single equipment debugging, online debugging and Feeding trial operation,to ensure that equipments can normal operate in full load conditions. We will provide all kinds of information and records according to the requirements of the bid. The qualified completion files will be provided to customers according to their requirements within one month after acceptance. |
|
9. |
In the warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers will take the responsibility for the free repair and replacing spare part. Due to the damage caused by the customer,we only charge material costs for repair and replacement. After the receipt of customers notice,we will suggests the method to solve problem within six hours, or send specialist to the site to solve the problem within twenty four hours. |
workshop picturescustomers and honors
Technical parameters of Qie New Generation Well-Loved Automatic Palm Oil Fractionation Machine
| Dimension(L*W*H) | according to the specification |
| Weight | 42ton, changed with the capacity |
| Certification | ISO9001,BV,CE |
| Warranty | 12 months |
| After-sales Service Provided | Engineers available to service Machine overseas |
| Usage | Palm Oil |
| Automatic Grade | Automatic |
| Capacity | 1T to 500T |
| Material of equipment | stainless steel and carbon steel |
| Raw material | all kins of oil seeds |
| including | machines,installation,tech consulting after sales |
| operattion | automatic and safe |
| type | palm kernel oil processing machine |
